MELBOURNE'S CERTIFIED KNX INSTALLATION EXPERTS
Looking for a KNX installer in Melbourne? DUKE Electrical Group, certified KNX Partners, deliver KNX installations end to end – design, cabling, device installation, programming and commissioning – for homes and commercial buildings across the city. As licensed electricians (REC 35838) with more than 15 years in lighting control and automation, we are one of the few Melbourne teams who take a KNX project from the switchboard all the way to the finished, programmed system without handing off the hard parts.
KNX rewards a properly-engineered installation. A clean bus topology, correctly-placed sensors and disciplined ETS programming are what separate a system that is a joy to use from one that frustrates. We get the fundamentals right so your KNX system is reliable from day one.
How a DUKE KNX installation works
1. Design. We map every function – lighting, climate, blinds, security – and design the bus topology, devices and interfaces around how your home or building actually runs.
2. Cabling and devices. Our electricians install clean, compliant KNX bus wiring and mount actuators, sensors, power supplies and interfaces to specification.
3. Programming and commissioning. We program the system in ETS, test every function, and fine-tune scenes and automation before handover.
4. Training and documentation. We show you how to use it and hand over full documentation, including the ETS project, so your system is never a black box.
Get a KNX installer who understands both the technology and the electrical trade. Call DUKE Electrical Group on 1300 003 853 to book a KNX consultation and site assessment with one of Melbourne’s most experienced KNX teams.
Related: KNX lighting control, home control, programming & ETS and retrofit & upgrades. See also our C-Bus and automation services.
NEW BUILDS
The ideal time for KNX. We coordinate with your builder and design the cabling and devices in early, for a flawless integrated result at handover.
RENOVATIONS
We install KNX as part of your renovation works, taking advantage of open walls and ceilings to run a proper wired bus where it counts.
RETROFITS
For finished homes and buildings we combine wired and wireless KNX RF to add smart control with minimal disruption – no need to gut the place.
COMMERCIAL FIT-OUTS
We deliver KNX in office, retail and institutional fit-outs, coordinating with other trades and cutting over in planned stages to keep sites operating.
FAQ
Are you qualified to install KNX?
Yes. DUKE Electrical Group are certified KNX Partners, listed in the official KNX Partner directory, as well as licensed electricians (REC 35838) and fully insured. Because KNX involves both electrical work and ETS programming, using a certified, licensed team keeps your installation safe, compliant and properly engineered.
What does a KNX installation involve?
It involves designing the system, installing the KNX bus cabling and devices (actuators, sensors, power supplies, switches and panels), programming everything in the ETS software, and commissioning and testing each function before handover. We manage the whole process for you.
Can you install KNX in an existing home without major renovation?
Often, yes. We combine wired KNX where cable can be run with wireless KNX RF where it cannot, so we can add smart control to a finished home with minimal disruption. See our KNX retrofit and upgrades page for more.
How long does a KNX installation take?
It depends on the size and complexity – the number of circuits, devices and integrations. A single-room or small-home system is quick, while a large home or commercial building is scheduled in stages. We give you a clear timeline with your quote.
Will you program the system, or just wire it?
Both. Unlike installers who only do the wiring, we design, install, program in ETS and commission the complete system. That single-team accountability means fewer misunderstandings and a system that works properly on day one.
Can KNX be installed alongside my existing lighting or AV?
Usually yes. KNX integrates with DALI lighting, audio-visual systems and many other standards. We assess your existing equipment during design and build the integration into the installation.
Do you provide documentation after installation?
Yes. We hand over full documentation including the ETS project file, so your system is transparent and any future technician (including us) can service and expand it easily. Your KNX system is never locked to one installer.
How do I get started?
Call DUKE Electrical Group on 1300 003 853 or contact us online. We will arrange a site assessment, discuss your goals and provide a clear plan and quote for your KNX installation.
How KNX Cuts Energy Bills in Commercial Buildings
Energy is one of the largest controllable costs in a commercial building. Here’s how KNX building control reduces it, room by room.
How to Retrofit KNX into an Existing Melbourne Home (Without Rewiring)
You don’t need to build new to enjoy KNX. Here’s how a KNX retrofit works in an existing Melbourne home, including wireless KNX RF.
KNX Lighting Control: Scenes, Dimming and Circadian Lighting Explained
Scenes, dimming and circadian lighting are where KNX lighting control really shines. Here’s what each one means and how it transforms a Melbourne home.
KNX vs C-Bus vs Control4: Which Smart Home System Is Right for Your Melbourne Home?
KNX, Clipsal C-Bus and Control4 are three of the most popular smart-home systems in Melbourne. Here’s how they compare and how to choose.
What Is KNX? A Melbourne Guide to the Open Smart-Home Standard
KNX is the worldwide open standard for home and building control. Here’s what it is, how it works, and why Melbourne homeowners and building owners are choosing it.
Control4 X4 Has Landed
Control4 X4 Has Landed — and It’s the Biggest Smart Home Upgrade in Years Control4’s all-new X4 operating system reinvents how Melbourne homes and businesses